Arrow AK600 Instruction Manual download pdf (Page 3)

Anchors are at proper depth when there is 1"

(25mm) space under the eye as shown.

Move Floor Frame back in position over

Anchors. Turn each Anchor slightly as necessary

to align eye with slots in Gusset so that Floor

Frame will rest on the ground.

STEP 3

Tightening the Anchors

1. Insert a Retainer (tabs pointing down) under the

eye of each Anchor so that tabs drop into slot in

Gusset. Retainer must be flat against Gusset.

Turn Anchor clockwise until eye is

firmly

against

Retainer. DO NOT OVER TIGHTEN!

Turn Clockwise

into ground

IMPORTANT:

Anchor

must

go straight down into

the ground. Do not allow Anchor to

angle or wander from the starting

point.

NOTE: Each Corner Anchor can be tightened much

easier with the Corner Panel removed from

building.

IMPORTANT: Re-install each Corner Panel

before removing another

Corner Panel from building.

"Starter

Hole"

Gusset

EyeSlot

Turn Clockwise To

Tighten

Anchor

Eye

Gusset

Retainer

Slot

TIGHTEN ANCHORS

ONLY

AFTER BUILDING HAS BEEN ERECTED.

CAUTION

PU3

1 2 3 4

Comments to this Manuals

No comments

Arrow AK600 Instruction Manual Page 3

Comments to this Manuals