Arrow CHD1010 Instruction Manual download pdf (Page 34)

Step 11: Continued

34H

DO NOT fully tighten Ridge Cap bolts until you

have both Ridge Cap bolts in place. This will ease

assembly. Bolts must be fully tightened before moving on to

the next page.

For 10’x15’ (3,0 m x 4,6 m) or larger.

10621

For 10’x10’ (3,0 m x 3,1 m) ONLY.

You will need:

Ridge Cap -

F/R

10621

(QTY: 2)

You will need:

Ridge Cap -

F/R

10621

(QTY: 2)

Ridge Cap -

Mid

10680

End of Ridge Cap with four holes must

face toward the outside of the building.

Do not secure at this time.

End of Ridge Cap with four holes must

face toward the outside of the building.

Do not secure at this time.

Overlap two Front and Rear Ridge Caps

as shown and secure with two Small

Bolts and Nuts.

Overlap one Front and Rear Ridge

Cap and one Mid Ridge Cap as

shown and secure with two Small

Bolts and Nuts.

10621

10680

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

No comments

Arrow CHD1010 Instruction Manual Page 34